Our Mission: "Efficiently support  our customers through our superior attention to details"
About

Home

Line card

Literature

Contact

Din 43650 Wire Strippers Hirschmann Sealcon Mechatronics
Liquid Tight Straight Strain Relief Fittings
Metric Threads - Nickel Plated Brass

SPECIFICATIONS:
Pressure rating:
150 PSIG (10 BAR) NEMA 4X or 6 (submersible) IP68

Materials
Body, Dome & Locking Nut: Nickel plated brass
Spring (Flex extension): Stainless Steel
Splined Bushing:  Nylon 6/6
Form Seal & O-Ring: Buna-N
 
Operating Temperature: -40°F to 212°F (-40°C to 100°C)
Short term exposure: 248°F (120°C)

Nickle Plated Brass Product Pictures

Technical Drawing

Wherever a metal strain relief fitting is used, this strain relief fitting will give you a greatly increased cable range with superior corrosion protection.  Typical applications are: Control cabinets, marine, car washes, -hot tubs, instrumentation, carpet cleaning machines, food processing equipment, underground for direct burial or submersed up to 300 ft. (150 PSIG)


Product Specifications

 

PART NUMBERS CABLE
RANGE

THREAD RANGE

DIMENSIONS: INCHES (MM)

Dome Fittings
Nickel Plate Brass - Strain Relief Fitting Tech Drawing
Brass
Flex Fittings
Nickel Plated Brass - Strain Relief Fittings Tech Drawing
Brass

Inches (mm)

 
A

Clearance

Hole

+.010"
     0

+.25 mm
0       

B

Body

Length

 

Dome

C

Body Length

 

Flex

D

Thread

Length

 

 

F1 / F

Wrench

Flat

*CD06MW-BR   .08 - .13 (2 - 3.2) M6 x 1.0 .25 (6) .39 (10) -- .24 (6) .31 (8)
*CD08MW-BR   .12 - .20 (3 - 5) M8 x 1.25 .33 (8) .51 (13) -- .24 (6) .43 (11)
CD10MW-BR   .16 - .24 (4 - 6) M10 x 1.5 .39 (10) .55 (14) -- .24 (6) .47 (12)
CD12MA-BR CF12MA-BR .11 - .26 (3 - 6,5) M12 x 1.5 .473 (12) .75 (19) 2.17 (55) .20 (5) .55 (14)
CD12MR-BR CF12MR-BR .08 - .20 (2 - 5)
CD16MA-BR CF16MA-BR .16 - .31 (4 - 8) M16 x 1.5 .63 (16) .83 (21) 2.60 (66) .24 (6) .67 (17) / .75 (19)
CD16MR-BR CF16MR-BR .08 - .24 (2 - 6) .67 (17) / .75 (19)
CD17MA-BR CF17MA-BR .20 - .39 (5 - 10) M16 x 1.5 .63 (16) .87 (22) 3.03 (77) .24 (6) .79 (20)
CD17MR-BR CF17MR-BR .11 - .28 (3 - 7)
CD20MA-BR CF20MA-BR .24 - .47 (6 - 12) M20 x 1.5 .787 (20) .91 (23) 3.46 (88) .24 (6) .87 (22)
CD20MR-BR CF20MR-BR .20 - .35 (5 - 9)
CD22MA-BR CF22MA-BR .39 - .56 (10 - 14) M20 x 1.5 .787 (20) .94 (24) 3.86 (98) .24 (6) .94 (24)
CD22MR-BR CF22MR-BR .28 - .47 (7 - 12)
CD25MA-BR CF25MA-BR .51 - .71 (13 - 18) M25 x 1.5 .984 (25) 1.02 (26) 4.37 (111) .28 (7) 1.18 (30)
CD25MR-BR CF25MR-BR .35 - .63 (9 - 16)
CD32MA-BR   .71 - .98 (18 - 25) M32 x 1.5 1.26 (32) 1.22 (31)  -- .31 (8) 1.57 (40)
CD32MR-BR   .51 - .79 (13 - 20)
CD40MA-BR   .86 - .1.26 (22 - 32) M40 x 1.5 1.575 (40) 1.46 (37) -- .31 (8) 1.97 (40)
CD40MA-BR   .79 - .1.02 (20 - 26)
CD50MA-BR   1.26 - 1.50 (32 - 38) M50 x 1.5 1.969 (50) 1.46 (37) -- .35 (9) 2.24 (57)
CD50MR-BR   .98 - 1.22 (25 - 31)
CD63MA-BR   1.45 - 1.73 (37 - 44) M63 x 1.5 2.48 (63) 1.50 (38) -- .39 (10) 2.52 (64) / 2.68 (68)
CD63MR-BR   1.14 - 1.38 (29 - 35) 2.52 (64) / 2.68 (68)
Longer thread lengths available in Metric sizes.  
* To specify VitonŽ replace -BR with -RV VitonŽ is a federally registered trademark of DuPont Dow Elastomer.

Major Electronix, Corporation
33851 Curtis Blvd #215
Eastlake, Oh 44095
Ph:440-942-0054  800-966-2345  Fx: 440-942-2102

Copyright Š 2000-2008 Major Electronix Corporation. All Right Reserved.