Our Mission: "Efficiently support  our customers through our superior attention to details"
About

Home

Line card

Literature

Contact

Din 43650 Wire Strippers Hirschmann Sealcon Mechatronics
O-Rings & Seal Rings -  PG/NPT/Metric Threads

 

Assembly Instructions

Product Specifications

 

PART NUMBERS

FIT THREAD

SIZES

DIMENSIONS (INCHES)

Seal Rings O-Rings
(Buna-N)

O-Rings
(Viton)

  Seal Rings O-Rings
A
B
C
D
E
SM-12-NY OM-12-BN OM-12-VT M12 x 1,5 .47 (12) .63 (16) .08 (2) .39 (10) .06 (1.5)
SR-07-NY OR-07-BN OR-07-VT PG 7 / 1/4" NPT .49 (12) .65 (16.5) .08 (2) .39 (10) .06 (1.5)
SR-09-NY OR-09-BN OR-09-VT PG 9 .60 (15.2) .75 (19) .08 (2) .47 (12) .06 (1.5)
SR-11-NY OR-38-BN OR-38-VT 3/8" NPT .73 (18.6) .89 (22.5) .08 (2) .51 (13) .08 (2)
SM-16-NY OM-16-BN OM-16-VT M16 x 1,5 .63 (16) .77 (19.5) .08 (2) .47 (12) .06 (1.5)
SR-11-NY OR-11-BN OR-11-VT PG 11 .73 (18.5) .89 (22.5) .08 (2) .63 (16) .06 (1.5)
SM-20-NY OR-20-BN OR-20-VT M20 x 1,5 .79 (20) .94 (24) .08 (2) .67 (17) .07 (1.8)
SR-13-NY OR-13-BN / OR-18-BN OR-13-VT / OR-18-VT PG 13.5 / 1/2" NPT .80 (20.4) .98 (25) .08 (2) .67 (17) / .75 (19) .07 (1.8)
SR-16-NY OR-16-BN OR-16-VT PG 16 .89 (22.5) 1.06 (27) .08 (2) .71 (18) .06 (1.5)
SM-25-NY OR-25-BN OR-25-VT M25 x 1,5 .98 (25) 1.24 (31.5) .08 (2) .87 (22) .08 (2)
SR-21-NY OR-21-BN OR-21-VT PG 21 1.11 (28.3) 1.32 (33.5) .08 (2) 1.02 (26) .08 (2)
SR-34-NY OR-34-BN OR-34-VT 3/4" NPT 1.06 (27) 1.43 (36) .06 (1.5) .87 (22) .08 (2)
SM-32-NY OR-32-BN OR-32-VT M32 x 1,5 1.26 (32) 1.52 (38.5) .08 (2) 1.14 (29) .08 (2)
SR-29-NY OR-29-BN OR-29-VT PG 29 1.46 (37) 1.71 (43.5) .08 (2) 1.30 (33) .08 (2)
  OR-32-BN OR-32-VT 1" NPT -- -- -- 1.14 (29) .08 (2)
  OR-40-BN OR-40-VT 1-1/4" NPT -- -- -- 1.50 (38) .10 (2.5)
SM-40-NY OM-40-BN OM-40-VT M40 x 1,5 1.57 (40) 2.09 (53) .08 (2) 1.38 (35) .08 (2)
SR-36-NY OR-36-BN / OR-64-BN OR-36-VT / OR-64-VT PG 36 / 1-1/2" NPT 1.85 (47) 2.16 (55) .08 (2) 1.73 (44) .10 (2.5)
SM-50-NY OM-50-BN OM-50-VT M50 x 1,5 1.97 (50) 2.30 (60) .08 (2) 1.69 (43) .08 (2)
SR-42-NY OR-42-BN OR-42-VT PG 42 2.13 (54) 2.48 (63) .08 (2) 1.97 (50) .08 (2)
SR-48-NY OR-48-BN OR-48-VT PG 48 2.33 (59.3) 2.72 (69) .08 (2) 2.16 (55) .08 (2)
SM-63-NY OM-63-BN OM-63-VT M63 x 1,5 2.48 (63) 2.87 (73 .08 (2) 2.16 (55) .08 (2)


If NEMA 4x or 6 (European IP 68 - submersible) is required, O-Rings or Seal Rings (ordered separately) should be used when mounting Strain Relief Fittings to a control panel, secured with a locking nut. The Straight Strain Relief fittings feature a molded O-Ring groove. For these fittings, the Buna-N O-Ring is the best solution. The Snap Elbows and some of the Conduit Fittings do not have a recess for an O-Ring. In that case, the Polyethylene Seal Ring would be the best choice, unless the hole can be beveled to accommodate an O-Ring.


Major Electronix, Corporation
33851 Curtis Blvd #215
Eastlake, Oh 44095
Ph:440-942-0054  800-966-2345  Fx: 440-942-2102

Copyright 2000-2008 Major Electronix Corporation. All Right Reserved.

Major Electronix - Sealcon / Hummel O-Rings & Seal Rings
 
Our Mission: "Efficiently support  our customers through our superior attention to details"
About

Home

Line card

Literature

Contact

Din 43650 Wire Strippers Hirschmann Sealcon Mechatronics
O-Rings & Seal Rings -  PG/NPT/Metric Threads

 

Assembly Instructions

Product Specifications

 

PART NUMBERS

FIT THREAD

SIZES

DIMENSIONS (INCHES)

Seal Rings O-Rings
(Buna-N)

O-Rings
(Viton)

  Seal Rings O-Rings
A
B
C
D
E
SM-12-NY OM-12-BN OM-12-VT M12 x 1,5 .47 (12) .63 (16) .08 (2) .39 (10) .06 (1.5)
SR-07-NY OR-07-BN OR-07-VT PG 7 / 1/4" NPT .49 (12) .65 (16.5) .08 (2) .39 (10) .06 (1.5)
SR-09-NY OR-09-BN OR-09-VT PG 9 .60 (15.2) .75 (19) .08 (2) .47 (12) .06 (1.5)
SR-11-NY OR-38-BN OR-38-VT 3/8" NPT .73 (18.6) .89 (22.5) .08 (2) .51 (13) .08 (2)
SM-16-NY OM-16-BN OM-16-VT M16 x 1,5 .63 (16) .77 (19.5) .08 (2) .47 (12) .06 (1.5)
SR-11-NY OR-11-BN OR-11-VT PG 11 .73 (18.5) .89 (22.5) .08 (2) .63 (16) .06 (1.5)
SM-20-NY OR-20-BN OR-20-VT M20 x 1,5 .79 (20) .94 (24) .08 (2) .67 (17) .07 (1.8)
SR-13-NY OR-13-BN / OR-18-BN OR-13-VT / OR-18-VT PG 13.5 / 1/2" NPT .80 (20.4) .98 (25) .08 (2) .67 (17) / .75 (19) .07 (1.8)
SR-16-NY OR-16-BN OR-16-VT PG 16 .89 (22.5) 1.06 (27) .08 (2) .71 (18) .06 (1.5)
SM-25-NY OR-25-BN OR-25-VT M25 x 1,5 .98 (25) 1.24 (31.5) .08 (2) .87 (22) .08 (2)
SR-21-NY OR-21-BN OR-21-VT PG 21 1.11 (28.3) 1.32 (33.5) .08 (2) 1.02 (26) .08 (2)
SR-34-NY OR-34-BN OR-34-VT 3/4" NPT 1.06 (27) 1.43 (36) .06 (1.5) .87 (22) .08 (2)
SM-32-NY OR-32-BN OR-32-VT M32 x 1,5 1.26 (32) 1.52 (38.5) .08 (2) 1.14 (29) .08 (2)
SR-29-NY OR-29-BN OR-29-VT PG 29 1.46 (37) 1.71 (43.5) .08 (2) 1.30 (33) .08 (2)
  OR-32-BN OR-32-VT 1" NPT -- -- -- 1.14 (29) .08 (2)
  OR-40-BN OR-40-VT 1-1/4" NPT -- -- -- 1.50 (38) .10 (2.5)
SM-40-NY OM-40-BN OM-40-VT M40 x 1,5 1.57 (40) 2.09 (53) .08 (2) 1.38 (35) .08 (2)
SR-36-NY OR-36-BN / OR-64-BN OR-36-VT / OR-64-VT PG 36 / 1-1/2" NPT 1.85 (47) 2.16 (55) .08 (2) 1.73 (44) .10 (2.5)
SM-50-NY OM-50-BN OM-50-VT M50 x 1,5 1.97 (50) 2.30 (60) .08 (2) 1.69 (43) .08 (2)
SR-42-NY OR-42-BN OR-42-VT PG 42 2.13 (54) 2.48 (63) .08 (2) 1.97 (50) .08 (2)
SR-48-NY OR-48-BN OR-48-VT PG 48 2.33 (59.3) 2.72 (69) .08 (2) 2.16 (55) .08 (2)
SM-63-NY OM-63-BN OM-63-VT M63 x 1,5 2.48 (63) 2.87 (73 .08 (2) 2.16 (55) .08 (2)


If NEMA 4x or 6 (European IP 68 - submersible) is required, O-Rings or Seal Rings (ordered separately) should be used when mounting Strain Relief Fittings to a control panel, secured with a locking nut. The Straight Strain Relief fittings feature a molded O-Ring groove. For these fittings, the Buna-N O-Ring is the best solution. The Snap Elbows and some of the Conduit Fittings do not have a recess for an O-Ring. In that case, the Polyethylene Seal Ring would be the best choice, unless the hole can be beveled to accommodate an O-Ring.


Major Electronix, Corporation
33851 Curtis Blvd #215
Eastlake, Oh 44095
Ph:440-942-0054  800-966-2345  Fx: 440-942-2102

Copyright 2000-2008 Major Electronix Corporation. All Right Reserved.