Our Mission: "Efficiently support  our customers through our superior attention to details "
About

Home

Line card

Literature

Contact

Din 43650 Wire Strippers Hirschmann Sealcon Mechatronics
Multi-Hole - Liquid Tight Straight Strain Relief Fittings
PG/NPT/Metric Threads - Nylon & Nickel Plated Brass
Approvals

PART NUMBERS NYLON DOME FITTINGS
BLACK

THREAD TYPE AND SIZE

SEAL INSERTS
No. of Holes

Diameter

 of  Holes

Part Numbers of Inserts Only
mm Inches
CD07AP-BK PG 7 / 1/4" NPT SOLID PLUG 1.089.0799.19
CD09N1-BK

3/8" NPT

 PG 9

M16 x 1.5

 (Note 1)

4 1.4 .06 1.089.0900.19
CD09N2-BK 2 3.0 .12 1.089.0901.19
CD09N3-BK 5 1.6 .06 1.089.0902.19
CD09N4-BK 2 1.7 .07 1.089.0903.19
CD09N5-BK 10 1.4 .06 1.089.0904.19
CD09N6-BK 6 1.4 .06 1.089.0905.19
CD09N7-BK 3 1.7 .07 1.089.0906.09
CD09N8-BK 4 1.7 .07 1.089.0907.19
CD09N9-BK 4 2.3 .09 1.089.0908.19
CD09NP-BK SOLID PLUG 1.089.0999.99
CD11A1-BK PG 11 2 3.0 .12 1.089.1100.19
CD11A2-BK 3 3.0 .12 1.089.1101.19
CD11A3-BK 2 4.0 .16 1.089.1102.19
CD11A4-BK 3 1.5 .06 1.089.1103.19
CD11A5-BK 4 2.8 .11 1.089.1104.19
CD11AP-BK SOLID PLUG 1.089.1199.19
CD13N1-BK

1/2" NPT

 PG 13.5

 (Note 1)

3 2.0 .08 1.089.1300.19
CD13N2-BK 6 3.0 .12 1.089.1301.19
CD13N3-BK 3 4.0 .16 1.089.1302.19
CD13N4-BK 2 5.0 .20 1.089.1303.19
CD13N5-BK 3 3.0 .12 1.089.1304.19
CD13N6-BK 2 5.2 .20 1.089.1305.19
CD13N7-BK 2 3.8 .15 1.089.1306.19
CD13N8-BK 2 4.2 .17 1.089.1307.19
CD13N9-BK 2 2.5 .10 1.089.1308.19
CD13NP-BK SOLID PLUG 1.089.1399.19
CD16N1-BK

1/2" NPT

 PG 16

 (Note 1 & 2)

3 3.0 .12 1.089.1600.19
CD16N2-BK 3 4.0 .16 1.089.1601.19
CD16N3-BK 4 4.0 .16 1.089.1602.19
CD16N4-BK 5 4.0 .16 1.089.1603.19
PART NUMBERS NYLON DOME FITTINGS
BLACK

THREAD TYPE AND SIZE

SEAL INSERTS
No. of Holes

Diameter 

of  Holes

Part Numbers of Inserts Only
mm Inches
CD16N5-BK

1/2" NPT

  PG 16

 (Note 1 & 2)

6 4.0 .16 1.089.1604.19
CD16N6-BK 2 6.0 .24 1.089.1605.19
CD16N7-BK 3 5.6 .22 1.089.1606.19
CD16N8-BK 6 3.0 .12 1.089.1607.19
CD16N9-BK 4 3 .12 1.089.1610.19
CD16N0-BK 6 3.8 .15 1.089.1609.19
CD16NP-BK SOLID PLUG 1.089.1699.19
CD21N1-BK

3/4" NPT

 M25 X 1,5

PG 21

 (Note 1)

4 6.0 .24 1.089.2100.19
CD21N2-BK 3 7.0 .28 1.089.2101.19
CD21N3-BK 2 8.0 .31 1.089.2102.19
CD21N4-BK 4 5.0 .20 1.089.2103.19
CD21N5-BK 1 8.0 .31 1.089.2104.19
CD21N6-BK 4 5.2 .20 1.089.2105.19
CD21N7-BK 3 5.2 .20 1.089.2106.19
CD21N8-BK 4 5.2 .20 1.089.2107.19
CD21N9-BK 2 7.4 .29 1.089.2108.19
CD21NP-BK SOLID PLUG 1.089.2199.19
CD29N1-BK

1" NPT

  M32 x 1,5

PG 29

 (Note 1)

6 6.5 .26 1.089.2900.19
CD29N2-BK 4 9.0 .35 1.089.2901.19
CD29N3-BK 4 9.5 .37 1.089.2902.19
CD29NP-BK SOLID PLUG 1.089.2999.19
CD29L1-BK 1-1/4" NPT 6 6.5 .26 1.089.2900.19
CD36N1-BK

1-1/2" NPT

 PG 36

M40 x 1,5

 (Note 1)

5 9.0 .35 1.089.3600.19
CD36N2-BK 7 9.0 .35 1.089.3601.19
CD36N3-BK 6 8.0 .31 1.089.3602.19
CD36N4-BK 2 15.0 .59 1.089.3603.19
CD36NP-BK SOLID PLUG 1.089.3699.19
CD42A1-BK PG 42
M50 x 1,5
3 14.0 .55 1.089.4203.19
CD42AP-BK SOLID PLUG 1.089.4299.19
CD48A1-BK PG 48
M63 x 1,5
8 10.0 .39 1.089.4800.19
CD48A2-BK 6 12.0 .47 1.089.4801.19
CD48A3-BK 3 18.0 .71 1.089.4802.19
CD48AP-BK SOLID PLUG 1.089.4899.19
 

IMPORTANT:

Design Parameters: Cable diameter should not be less than 80% of hole diameter and the difference between hole and cable diameter should never exceed .04" (1 mm).

 

The Multi Cable fittings will meet NEMA 4x = IP65 if the design parameters are complied with.  To verify a submersible NEMA 6= IP68 application, the final assembly of cables and fittings must be tested by the customer or submitted at the customer's expense to an independent test lab or Sealcon for certification.

 

How to Order Non-Listed Parts

Note 1: To Substitute a different thread type replace the 5th position with the following:

            "A" PG Thread, "N" NPT Thread, "M" Metric Thread. e.g. CD09N1-BK becomes

            CD09A1-BK.


Note
2: Not available in Nickel Plated Brass with NPT Threads.

  • Strain Relief Fitting with Flex Nut
    Substitute "F" for "D" e.g. CDO9N1-BK becomes CF09N1-BK.
  • Snap Elbow Fitting with Dome Nut
    Substitute "E" for "C" e.g. CD09N1-BK becomes ED09N1-BK.
  • Snap Elbow with Flex Nut
    Substitute "EF" for "CD" e.g. CD09N1-BK becomes EF09N1-BK.
  • Nickel Plated Brass Strain Relief Fitting
    Substitute "BR" for "BK" e.g. CD09N1-BK becomes CD09N1-BR.
  • Gray Strain Relief Fitting
    Substitute "GY" for "BK" e.g. CD13N2-BK becomes CD13N2-GY.

Major Electronix, Corporation
33851 Curtis Blvd #215
Eastlake, Oh 44095
Ph:440-942-0054  800-966-2345  Fx: 440-942-2102

Copyright 2000-2008 Major Electronix Corporation. All Right Reserved.